Curved Wheelchair Mounts

Sometimes you need a specific offset between you and the mount. You might, for example, require a particular distance to a communication device that is using eye tracking or to a tray table. In those cases, you can use a mounting system with curved tubes, to get the extra offset.

Our curved wheelchair mounts are available in three different sizes, giving you the offset that suits you the best, without any additional joints.

QuickShift joints and double-clamp device sockets are optional.

The curved wheelchair mounts come in three different sizes, giving you the offset that suits you the best - Rehadapt
Illustration of curved wheelchair mount, by Rehadapt
Illustration of curved wheelchair mount, by Rehadapt
Illustration of curved wheelchair mount, by Rehadapt

Curved Wheelchair Mounts with Indexing Latch

  • Monty 3D, medium sized curved wheelchair mount for extra offset to device or tray, by Rehadapt
    View Cart
    Details

    Monty 3D Curved M

    11.4700

    WheelchairDedicated communication devicesM3DM3D22UDS

    Two-Tube mount with a 66 cm high Tube (25,9") with a 23 cm offset (9") to place devices in front of the lap. Attachment on the side of the wheelchair. Bolted joint. Simple swivel clamp.
  • Monty 3D, large sized curved wheelchair mount for extra offset to device or tray, by Rehadapt
    View Cart
    Details

    Monty 3D Curved L

    11.4710

    WheelchairDedicated communication devicesM3DM3D22UDS

    Two-Tube mount with a 76 cm high (29,9") Tube with an enhanced 30 cm offset (#11,8") to place devices in front of the lap. Attachment on the side of the wheelchair. Bolted joint. swivel unit with ratchet mechanism to prevent sagging.
  • Monty 3D, our largest curved wheelchair mount that gives extra offset to your device or tray, by Rehadapt
    View Cart
    Details

    Monty 3D Curved XL

    11.4720

    WheelchairDedicated communication devicesM3DM3D22UDS

    Two-Tube mount with a 86 cm high (33,8") Tube with an extra large 30 cm offset (#11,8") to place devices high in front of the lap. Attachment on the side of the wheelchair. Bolted joint. swivel unit with ratchet mechanism to prevent sagging.

Curved Wheelchair Mounts with Indexing Slot and Quickshift Lever

  • Monty 3D, medium size curved wheelchair mount that gives extra offset between you and your device or tray, by Rehadapt
    View Cart
    Details

    Monty 3D Curved M-QS

    11.4701

    WheelchairDedicated communication devicesM3DM3D22UDS

    Two-Tube mount with a 66 cm high Tube (25,9") with a 23 cm offset (9") to place devices in front of the lap. Attachment on the side of the wheelchair. QuickShift joint. swivel unit. Double-clamp device socket.

    with swivel S unit and QuickShift levers

  • Monty 3D, large size curved wheelchair mount that gives extra offset between you and your device or tray, by Rehadapt
    View Cart
    Details

    Monty 3D Curved L-QS

    11.4711

    WheelchairDedicated communication devicesM3DM3D22UDS

    Two-Tube mount with a 76 cm high (29,9") Tube with an enhanced 30 cm offset (#11,8") to place devices in front of the lap. Attachment on the side of the wheelchair. QuickShift joint. swivel unit with ratchet mechanism to prevent sagging. Double-clamp device socket.

    with QuickShift levers

  • Monty 3D, extra large curved wheelchair mount that gives plenty of offset between you and your device or tray, by Rehadapt
    View Cart
    Details

    Monty 3D Curved XL-QS

    11.4721

    WheelchairDedicated communication devicesM3DM3D22UDS

    Two-Tube mount with a 86 cm high (33,8") Tube with an extra large 30 cm offset (#11,8") to place devices high in front of the lap. Attachment on the side of the wheelchair. QuickShift joint. swivel unit with ratchet mechanism to prevent sagging. Double-clamp device socket.

    with QuickShift levers