System bridges

AMPS hole pattern

The AMPS hole pattern is an industry standard configuration. It consists of four holes located in a rectangular pattern spaced at 30,17 mm by 46,05 mm. It is common for the AMPS pattern to consist of multiple holes to allow vertical or horizontal implementation. For hand-held and tablet-sized devices. Many cradles, brackets and protective cases (e.g. LifeProof) use the AMPS system.

  • L3D GA Lifeproof Cradle

    14.1546

    Smartphones & tabletsL3DL3D10SLS

    Device adapter with the Spigot Link System (SLS) for mounting devices in cradles or cases with a AMPS hole pattern (e.g. Lifeproof, RAM) on Rehadapt's Light 3D system.
  • MA-GA Lifeproof AMPS

    15.1027

    Smartphones & tabletsMA

    Device adapter for mounting cradles with AMPS pattern (like Lifeproof Cradle or RAM adapters) to MagicArm.
  • GA Lifeproof AMPS

    16.1169

    Dedicated communication devicesM3DUDS

    Device adapter to mount tablets with Lifeproof case or other cradles with AMPS hole pattern on Rehadapt's Universal Device Socket (UDS). UDS not included.

Velcro fastener

The famous hook-and-loop Velcro fastener consists of two components: a lineal fabric strip with tiny hooks that could “mate” with another fabric strip with smaller loops, attaching temporarily, until pulled apart. Perfect for attaching devices to our mounting system when no screws can be used.

  • L3D GA Universal-R-116/135

    14.1512

    Smartphones & tabletsL3DL3D10SLS

    Removable generic device adapter for mounting devices on Rehadapt's Light 3D System with the Spigot Link System (SLS). Interchageable fixation via Velcro tape. 116 mm x 135 mm.
  • L3D GA Universal#2

    14.1558

    Smartphones & tabletsL3DL3D10SLS

    Device adapter plate with the Spigot Link System (SLS) with Velcro for mounting items such as the Blue2 switch on the Light 3D system. Dimensions: 110 mm x 50 mm (3 5/16" x 2").
  • GA Universal-R-116/135

    16.1148

    Dedicated communication devicesM3DUDS

    Universal device adapter for mounting devices on Rehadapt's Universal Device Socket (UDS). Interchangeable fixation via Velcro tape. UDS not included.

VESA hole pattern

The VESA standard has typically square hole patterns for flat panel displays.

  • GA VESA 75×75

    16.1117

    Dedicated communication devicesM3DUDS

    Device adapter for mounting devices with VESA fittings (Hole pattern 75x75 mm/3"x3") on Rehadapt's Universal Device Socket (UDS). Fastening parts included. UDS not included.
  • GA VESA 100×100

    16.1123

    Dedicated communication devicesM3DUDS

    Device adapter for mounting devices with VESA fittings (Hole pattern 100x100 mm/4"x4") on Rehadapt's Universal Device Socket (UDS). Fastening parts included. UDS not included.

Adhesive tape

Permanent fixation with strong adhesive tape. Perfect for attaching devices to our mounting system when no screws can be used.

  • L3D GA Universal-F-116/135

    14.1511

    Smartphones & tabletsL3DL3D10SLS

    Generic device adapter for mounting devices on Rehadapt's Light 3D System with the Spigot Link System (SLS). Permanent fixation via strong adhesive tape. Dimensions: 116 mm x 135 mm.
  • GA Universal-F-116/135

    16.1147

    Dedicated communication devicesM3DUDS

    Universal device adapter for mounting devices on Rehadapt's Universal Device Socket (UDS). Permanent fixation via strong adhesive tape. UDS not included.