System bridges

AMPS hole pattern

The AMPS hole pattern is an industry stan- dard configuration. It consists of four holes located in a rectangular pattern spaced at 30,17 mm by 46,05 mm. It is common for the AMPS pattern to consist of multiple holes to allow vertical or horizontal imple- mentation. For hand-held and tablet-si- zed devices. Many cradles, brackets and protective cases (e.g. LifeProof) use the AMPS system

L3D GA Lifeproof Cradle

→ 14.1546

GA Cradle

→ 16.1238

L3D GA Cradle

→ 14.1577

VESA hole pattern

The VESA standard has typically square hole patterns for flat panel displays. To combine with our Universal Device Socket (UDS).

GA VESA 75x75

→ 16.1117

GA VESA 100x100

→ 16.1123

GA Universal 70/50

→ 16.1224

Velcro fastener

The famous hook-and-loop Velcro fastener consists of two components: a lineal fabric strip with tiny hooks that could “mate” with another fabric strip with smaller loops, attaching temporarily, until pulled apart. Perfect for attaching devices to our moun- ting system when no screws can be used.

GA Universal-R-116/135

→ 16.1148

L3D GA Universal#2

→ 14.1558

Adhesive tape

Permanent fixation with strong adhesive tape. Perfect for attaching devices to our mounting system indefinitely when no screws can be used.

GA Universal-F-116/135

→ 16.1147