Catalog
-
Mount-side half of L3D swivel unit with pins, lever and indexing slot (without the 2nd tube connector). Combine with any frame clamp to mount directly on the wheelchair.
Details -
L3D mount for the precise positioning of a single head switch. QuickShift levers, cable clips and receiver for the SLS connection. Tube lengths: 200 x 250 mm (8 x 10″). Frame clamp not included.
DetailsLight 3D Headrest 1-Switch
14.2415
-
L3D mount for the precise positioning of a single head switch. Flex Back tube, QuickShift levers, cable clips and receiver for the SLS connection. Tube lengths: 200 x 250 mm (8 x 10″). Frame clamp not included.
DetailsLight 3D Headrest 1-Switch Flex
14.2515
-
L3D mount for the precise positioning of two head switches. QuickShift levers, cable clips and two receivers for the SLS connection. Tube lengths: 300 x 100+250 x 100+250 mm (12 x 4+10 x 4+10″). Frame clamp not included.
DetailsLight 3D Headrest 2-Switch
14.3415
-
L3D mount for the precise positioning of two head switches. Two Flex Back tubes, QuickShift levers, cable clips and receivers for the SLS connection. Tube lengths: 300 x 100+250 x 100+250 mm (12 x 4+10 x 4+10″). Frame clamp not included.
DetailsLight 3D Headrest 2-Switch Flex
14.3515
-
L3D three-tube wheelchair mount with receiver for the SLS connection, swivel unit and QuickShift joints. Tube lengths: 250 x 350 x 250 mm (10 x 14 x 10″). Max. load capacity: 1.2 kg (2.6 lbs). Frame clamp not included.
DetailsLight 3D QuickShift SLS
14.3215
-
L3D three-tube wheelchair mount with universal device socket (UDS), swivel unit and QuickShift joints. Tube lengths: 250 x 400 x 300 mm (10 x 16 x 12″). Max. load capacity: 1.2 kg (2.6 lbs). Frame clamp not included.
DetailsLight 3D QuickShift UDS
14.3211
-
L3D two-tube wheelchair mount with receiver for the SLS connection and QuickShift joints. Tube lengths: 300 x 250 mm (12 x 10″). Max. load capacity: 1.2 kg (2.6 lbs). Frame clamp not included.
DetailsLight 3D TT SLS
14.2015
-
L3D two-tube wheelchair mount with universal device socket (UDS), base with swivel function and QuickShift joints. Tube lengths: 400 x 300 mm (16 x 12″). Max. load capacity: 1.2 kg (2.6 lbs). Frame clamp not included.
DetailsLight 3D TT UDS
14.2211
-
Monty 3D base mounting adapter to bolt to any flat surface. Combine with a Base Special or a Swivel Special to build a full unit.
DetailsM3D Adapter Ring
11.1074
-
Perpendicular connector that allows the attachment of M3D and L3D mounts on otherwise poorly accessible frame parts. Locking with Allen screws.
DetailsM3D Base Adapter 90°
11.1590
-
Coupler to easily remove the entire mount at the frame clamp. Precise alignment achieved through a racetrack-shaped connection. Hand lever and locking pin for maximum safety. Adds a 38mm offset (1.5″).
DetailsM3D Base Coupler
11.1555
