Loaing

Tube sockets

  • Light 3D 10 base unit special. Mount-side half of L3D 10 base unit – without frame adapter. Combine with any frame clamp to build an individual base for L3D Ø10mm (3/8″) tubes.

    Details
  • Light 3D 16 base unit special. Mount-side half of L3D 16 base unit – without frame adapter. Combine with any frame clamp to build an individual base for L3D Ø16mm (5/8″) tubes.

    Details
  • Light 3D 16 QuickShift base unit special. Mount-side half of L3D 16 base unit – without frame adapter. Combine with any frame clamp to build an individual base for L3D Ø16mm (5/8″) tubes.

    Details
  • Mount-side half of L3D swivel unit with pins and lever (without the 2nd tube connector). Combine with any frame clamp to mount directly on the wheelchair. Indexing slot and frame clamp not included.

    Details
  • Mount-side half of L3D swivel unit with pins, lever and indexing slot (without the 2nd tube connector). Combine with any frame clamp to mount directly on the wheelchair.

    Details
  • Perpendicular connector that allows the attachment of M3D and L3D mounts on otherwise poorly accessible frame parts. Locking with Allen screws.

    Details
  • Coupler to easily remove the entire mount at the frame clamp. Precise alignment achieved through a racetrack-shaped connection. Hand lever and locking pin for maximum safety. Adds a 38mm offset (1.5″).

    Details
  • Inner half of the M3D Base Coupler (11.1555) attached to the wheelchair. Part with the hand lever.

    Details
  • Outer half of the M3D Base Coupler (11.1555) attached to the mount. Part with the magnet.

    Details
  • Monty 3D connector HD. Connects the parallell tube’s that build HD double–tube systems.

    Details
  • Monty 3D upgrade kit to equip any M3D mount with a double tube. Significantly reduces vibration, allows for heavy devices on long mounts.

    Details
  • Monty 3D universal offset spacer 38mm (1 1/2″) to be applied between any mating M3D joint, base or swivel unit components.

    Details
  • Monty 3D universal offset spacer 25mm (1″) to be applied between any mating M3D joint, base or swivel unit components.

    Details
  • Mount-side half of Monty 3D base unit – without frame adapter. Combine with any frame clamp or adapter to build an individual base unit.

    Details
  • Mount-side half of Monty 3D base unit. Combine with any frame clamp (not included) or adapter to build an individual base unit. Clamping of the tube achieved with an additional screw.

    Details
  • Monty 3D rotation lock element for base unit to prevent the mount from sagging when carrying heavy loads.

    Details
Go to Top