Tube sockets
-
Perpendicular connector that allows the attachment of M3D and L3D mounts on otherwise poorly accessible frame parts. Locking with Allen screws.
DetailsM3D Base Adapter 90°
11.1590
-
Coupler to easily remove the entire mount at the frame clamp. Precise alignment achieved through a racetrack-shaped connection. Hand lever and locking pin for maximum safety. Adds a 38mm offset (1.5″).
DetailsM3D Base Coupler
11.1555
-
Inner half of the M3D Base Coupler (11.1555) attached to the wheelchair. Part with the hand lever.
DetailsM3D Base Coupler Inner Part
11.1553
-
Outer half of the M3D Base Coupler (11.1555) attached to the mount. Part with the magnet.
DetailsM3D Base Coupler Outer Part
11.1554
-
Monty 3D connector HD. Connects the parallell tube’s that build HD double–tube systems.
DetailsM3D Connector HD
11.1500
-
Monty 3D upgrade kit to equip any M3D mount with a double tube. Significantly reduces vibration, allows for heavy devices on long mounts.
DetailsM3D HD Upgrade-kit
11.1403
-
Monty 3D universal offset spacer 38mm (1 1/2″) to be applied between any mating M3D joint, base or swivel unit components.
DetailsM3D Offset link 1 ½”
11.1538
-
Monty 3D universal offset spacer 25mm (1″) to be applied between any mating M3D joint, base or swivel unit components.
DetailsM3D Offset link 1″
11.1525
-
Mount-side half of Monty 3D base unit – without frame adapter. Combine with any frame clamp or adapter to build an individual base unit.
DetailsM3D Tube Socket
11.1102
-
Mount-side half of Monty 3D base unit. Combine with any frame clamp (not included) or adapter to build an individual base unit. Clamping of the tube achieved with an additional screw.
DetailsM3D Tube Socket Lock
11.1106
-
Monty 3D rotation lock element for base unit to prevent the mount from sagging when carrying heavy loads.
DetailsM3D Tube Socket Rotation Lock
11.1080
-
Monty 3D double tube rotation lock element for base unit to prevent the mount from sagging when carrying heavy loads.
DetailsM3D Tube Socket Rotation Lock HD
11.1081
-
Mount-side half of HD swivel unit S with an anti-sagging mechanism. Frame clamp not included. Add a frame clamp to build an individual swivel unit S, attached directly to the wheelchair.
Details -
Mount-side half of swivel unit. Frame clamp not included. Combine with any frameclamp to build a swivel unit attached directly to the wheelchair. Indexing clamp included.
Details -
Mount-side half of swivel unit S. Frame clamp not included. Combine with any frame clamp to build an individual backlash-free, swivel unit S, attached directly to the wheelchair.
DetailsM3D Tube Socket Swivel-Joint-S
11.1222
-
Mount-side half of swivel unit S. Frame clamp not included. Combine with a frame clamp to build an individual backlash-free, swivel unit S, attached directly to the wheelchair. Indexing clamp included.
Details