Loaing

Preconfigurations

  • Light 3D 10 base unit with frame clamp for rectangular elements from 10 to 16 mm (3/8″ to 5/8″) wide, holds 10 mm (3/8″) L3D Tubes.

    Details
  • Light 3D 10 base unit. Connector Ø10 mm with frame clamp for round wheelchair Tube of Ø10 mm (3/8″ to 7/16″), holds 10 mm (3/8″) L3D Tubes.

    Details
  • Light 3D 10 base unit. Connector Ø10 mm with frame clamp for round wheelchair Tube of Ø11 – 11,5 mm (7/16″), holds 10 mm (3/8″) L3D Tubes.

    Details
  • Light 3D 10 base unit. Connector Ø10 mm with frame clamp for round wheelchair Tube of 12 – 13 mm (#1/2″) diameter, holds 10 mm (3/8″) L3D Tubes.

    Details
  • Light 3D 10 base unit. Connector Ø10 mm with frame clamp for round wheelchair Tube of 14 mm (9/16″) diameter, holds 10 mm (3/8″) L3D Tubes.

    Details
  • Light 3D 10 base unit. Connector Ø10 mm with frame clamp for round wheelchair Tube of 15 mm (9/16″) diameter, holds 10 mm (3/8″) L3D Tubes.

    Details
  • Light 3D 10 base unit. Connector Ø10 mm with frame clamp for round wheelchair Tube of 16 mm (5/8″) diameter, holds 10 mm (3/8″) L3D Tubes.

    Details
  • Light 3D 10 base unit. Tube connector Ø10 mm with frame clamp for round elements from 19 to 25 mm (¾” to 1″). Please state diameter upon order.

    Details
  • Light 3D 10 base unit. SuperClamp with Ø16 mm Pin & 16/10 joint with screw to clamp a 10 mm (3/8″) L3D Tube to boards or other angular & round structures sized 13 – 55 mm.

    Details
  • Light 3D 10 QuickShift base unit. SuperClamp with Ø16 mm Pin & 16/10 joint with lever to clamp a 10 mm (3/8″) L3D Tube to boards or other structures sized 13 – 55 mm.

    Details
  • Light 3D 16 base unit. Tube connector Ø16 mm with frame clamp for round frames from 19 – 25 mm (¾” to 1″) in diameter. (Please specify exact measurements).

    Details
  • Light 3D 16 base unit. SuperClamp with Ø16 mm Pin and 16/16 joint with screw, to mount L3D 16 (5/8″) Tubes to structures sized 13 – 55 mm. 360° positioning freedom.

    Details
  • Light 3D 16 QS base unit. SuperClamp with Ø16 mm Pin and 16/16 joint with lever to mount L3D 16 (5/8″) Tubes to structures sized 13 – 55 mm. 360° positioning freedom.

    Details
  • Light 3D 16 base unit. SuperClamp with Ø16 mm Pin to connect further L3D mount components. Suitable for boards or other angular & round structures sized 13 – 55 mm.

    Details
  • Mount-side half of L3D swivel unit with pins, lever and indexing slot (without the 2nd tube connector). Combine with any frame clamp to mount directly on the wheelchair.

    Details
  • Monty 3D base unit. Standard wheelchair frame clamp (round with Ø25 mm – 1″) and Tube clamp.

    Details

    M3D 1-Base

    11.1100

Go to Top