“The mother of all sockets” – our universal device socket (UDS) includes our quick release mechanism which allows for the safe device attachment within seconds. The footprint on the device is minimal, yet great sturdiness is achieved!

Universal Device Sockets

Rehadapt’s signature quick release system in different variants.

System bridges

Combine your existing mounting elements with Rehadapt’s ecosystem.

Universal Device Sockets

Rehadapt’s signature quick release system with ball-joint in three versions.

UDS-22-DC

→ 16.1051

  • with 3 axes of rotation.

  • two levers for separated fixation of the ball joint and the tube clamp. This way, the weight of the device remains supported during repositioning.

  • The included bolts and Quickshiftlever allow you to replace or optimize the extisting fastening elements.

UDS-22

→ 16.1000

  • fixation with a bolt.

UDS-22 QuickShift

→ 16.1050

  • fixation with a QuickShift lever.

UDS-ECO

→ 16.1004

  • with 1 axis of rotation.

The most economic and compact version of Rehadapt‘s quick release system: sitting directly on the tube. Allows for the rotation around the tube axis. Fastened with a bolt.

UDS-ECO-Plus

→ 16.1005

  • with 2 axes of rotation.

Excellent compromise between economic yet flexible use of Rehadapt‘s quick release system. Allows for the rotation around the tube axis and the twisting of the screen. Fastened with a bolt.

System bridges

L3D UDS | 14.1516
Universal Device Socket (UDS) with Spigot Link to use UDS-adapted devices on Rehadapt's Light 3D system.
UDS-Vesa-AD | 16.1010
Universal Device Socket (UDS) with adapter for mounting on a VESA 75 or 100 fitting. Enables 3rd party monitor holders to carry Rehadapt devices. Allen wrench included.
Daessy Adapter | 16.1020
Adapter piece to mount devices with Daessy adapter on Rehadapt's Universal Device Socket (UDS), UDS not included.
M3D Edero Arm Support Adapter | 16.1022
Device adapter for mounting the Edero Arm Support from Armon on Rehadapt's Monty 3D system. Includes a pin for inserting the arm and a tube for parking it. Watch the Youtube episode about the Edero arm support right now! Mounting Made Easy: Installing the Edero arm support
Tube Ø10-50 1/4"-UNC | 14.9511_SW
L3D tube with 1/4" thread for switch adapters on one end. Diameter: 10mm (3/8"). Length: 50mm (2").
GA Universal 70/50 | 16.1224
Device adapter plate for mounting devices on Rehadapt's Universal Device Socket (UDS). Compatible with the EyeGaze holder (#16.1193).
LC-Tech-Adapter | 16.1021
Device adapter for mounting Eyegaze Edge Talker on Rehadapt's Monty 3D system.

System bridges

AMPS hole pattern

The AMPS hole pattern is an industry stan- dard configuration. It consists of four holes located in a rectangular pattern spaced at 30,17 mm by 46,05 mm. It is common for the AMPS pattern to consist of multiple holes to allow vertical or horizontal imple- mentation. For hand-held and tablet-si- zed devices. Many cradles, brackets and protective cases (e.g. LifeProof) use the AMPS system

L3D GA Lifeproof Cradle

→ 14.1546

GA Cradle

→ 16.1238

L3D GA Cradle

→ 14.1577

VESA hole pattern

The VESA standard has typically square hole patterns for flat panel displays. To combine with our Universal Device Socket (UDS).

GA VESA 75x75

→ 16.1117

GA VESA 100x100

→ 16.1123

GA Universal 70/50

→ 16.1224

Velcro fastener

The famous hook-and-loop Velcro fastener consists of two components: a lineal fabric strip with tiny hooks that could “mate” with another fabric strip with smaller loops, attaching temporarily, until pulled apart. Perfect for attaching devices to our moun- ting system when no screws can be used.

GA Universal-R-116/135

→ 16.1148

L3D GA Universal 100x50

→ 14.1558

Adhesive tape

Permanent fixation with strong adhesive tape. Perfect for attaching devices to our mounting system indefinitely when no screws can be used.

GA Universal-F-116/135

→ 16.1147