Two-Tube mount with a 86 cm high (33,8″) Tube with an extra large 30 cm offset (#11,8″) to place devices high in front of the lap. Attachment on the side of the wheelchair. Bolted joint. swivel unit with ratchet mechanism to prevent sagging.
Monty 3D Curved XL
11.4720
super starkes Flugzeugaluminium
quick release system
solid fixation to any wheelchair
Rehadapt's signature tube joints allow for full 360¡ adjustment in all dimensions. With Allen wrench screws.
By first turning the quickshift lever, then slightly lifting and turning the mount the 3 built-in positions can be used.
Curved tubes in three sizes, to get extra offset from the mount attachment point without additional joints.Description
Wheelchair mount with Universal Device Socket (UDS). Fully 3D adjustable joints with screws. Two tube solution with extra-large offset tube for devices high in front of body. For attachment on the side of wheelchair. Bolted joints. Ratchet swivel bearing for 3 pre-defined positions: operating, exiting, parking. With backlash-free swivel functions (lever-locked). Extra-high load capacity through anti-sagging element in the Swivel joint.
Additional information
| Location | Wheelchair |
|---|---|
| Device | Dedicated communication devices |
| Platform | M3D |
| Tube | M3D22 |
| Quick release system | UDS |
Measurements
| width | 40 cm |
|---|---|
| length | 40 cm |
| height | 86 cm |
| deviceheight | 102 cm |
| tube1 | - cm |
| tube2 | 40 cm |
| tube3 | - cm |
| weight | 1,52 kg |
| loadcapacity | 6,0 kg |
| width | 15,7 inch |
| length | 11,8 inch |
| height | 33,8 inch |
| deviceheight | 40,1 inch |
| tube1 | - inch |
| tube2 | 15,7 inch |
| tube3 | - inch |
| weight | 3,35 lbs |
| loadcapacity | 13,2 lbs |
