Overview
The connection of the tubes are critical in many ways. The flexibility of the joints define the versatility of the entire mount, and the force the connection points can take define the overall sturdiness.
Rehadapt’s signature joints combine maximum strength and flexibility with very intuitive operation. They can connect all three types of Rehadapt tubes. All joints are available with different options like with Allen screws, QuickShift levers or with an extra screw for locking the tube while still allowing movement.
3D JOINTS
full 360° adjustment in all dimensions
FIXED JOINTS
connect tubes at a fixed angle
SWIVEL JOINTS
swing your mounts between different positions
FOLDING JOINTS
move a device easily up and then forwards
Indexing rings
Swing the mount to three predefined positions: operating (1), exiting (2) and parking (3). Achieve this by either latching the pin into the desired position or sliding it smoothly through the slot.
Indexing clamp for the M3D swivel joint. Allows the continuous transition between the positions "operating" and "entering". Additional latch for the "parked" position.
Indexing clamp for the L3D swivel joint. Allows the continuous transition between the positions "operating" and "entering". Additional latch for the "parked" position.
Indexing clamp for the M3D swivel units 11.1220, 11.1082, 11.1222 and 11.1223. Allows the continuous transition between the "operating", "exiting" and "parked" position.
3D JOINTS
Rehadapt’s signature joints for full 360° adjustment in all dimensions with different options.
M3D 22-22 joints
Screw
Adjusting the joint with an Allen bolt.
QuickShift lever
With additional QuickShift lever to adjust without tools.
Screw & lock
Additional Allen bolt locks the tube’s movement.
QuickShift lever & lock
Additional QuickShift lever to adjust without tools andAllen bolt to lock the tube’s movement.
Ratchet Joint
Features a ratchet mechanism for a stepwise range of adjustment of 180°. Individual locking of the tubes and ratchet with Allen bolts.
Connects two Ø22mm (7/8″) tubes
Connecting different tube diameters
| Combined diameters | Screw | Screw & lock | QuickShift lever | OS level & lock |
|---|---|---|---|---|
| M3D22 to M3D22 | 11.1300 | 11.1305 | 11.1350 | 11.1355 |
| M3D22 to L3D16 | 14.1203 | 14.1253 | ||
| M3D22 to L3D10 | 14.1204 | 14.1264 | ||
| L3D16 to L3D16 | 14.1200 | 14.1257 | 14.1250 | 14.1254 |
| L3D16 to L3D10 | 14.1201 | 14.1258 | 14.1251* | 14.1255 |
| L3D10 to L3D10 | 14.1202 | 14.1259 | 14.1252 | 14.1256 |
*variant with a smaller lever for a smaller footprint (14.1271)
FIXED JOINTS
Rehadapt’s joints connecting tubes at a fixed angle.
Compact joint used to connect two L3D10 rods at a fixed angle of 90°. Allen wrench included.
Monty 3D connector HD. Connects the parallell tube's that build HD double–tube systems.
Compact joint used to connect two L3D10 rods at a fixed angle of 65°. Allen wrench included.
SWIVEL JOINTS
Swing the mount to predefined positions and secure its position with an adjustable clamping force.
Our swivel joints let you easily swing the mount between predefined positions. Just open the QuickShift lever and lift the mount upwards. Due to the adjustable clamping force of the lever this can even performed by the user himself.
M3D
M3D joint that allows the mount to be effortlessly swinged away for entering/exiting the wheelchair. Smooth bearing-driven mechanism and activation with a simple push button. Can be operated by the wheelchair user.
Replacement kit for the swivel joint S with a tough steel lever.
Indexing clamp for the M3D swivel joint. Allows the continuous transition between the positions "operating" and "entering". Additional latch for the "parked" position.
Indexing clamp for the M3D swivel joint. Allows the continuous transition between the positions "operating" and "entering". Additional latch for the "parked" position.
L3D
Indexing clamp for the L3D swivel joint. Allows the continuous transition between the positions "operating" and "entering". Additional latch for the "parked" position.
FOLDING JOINTS
Fold down unit to move the device easily up and then to the side of the wheelchair. For use with M3D22 tubes.
Fold down unit to move the device easily up and then to the side of the wheelchair. For left side mounting.
Fold down unit to move the device easily up and then to the side of the wheelchair. For right side mounting.