Overview
Rehadapt offers a wide range of adapters to fit onto any kind of communication device – no matter if it’s a laptop, a smartphone or just a symbol book or pointing board. You can even combine different connection systems to integ- rate your existing mount within the Rehadapt ecosystem.
Device types
Basically Rehadapt subdivides the almost endless amount of devices to mount into three different types:
Connection types
Adapters are permanently fixed to the device. This way you can attach and detach them easily with different release systems:
“UDS”
Quickly hook them in and out of the universal device socket
“SLS”
Insert them into the spigot link system
Switches & Controls
Adapters for small and lightweight devices for switches and joysticks made by different manufacturers. Usually in use with the spigot link system (SLS).
For dedicated switches
For dedicated joysticks
For universal use
For use with a joint
These adapters include a 3D joint for mounting onto 10 mm (3/8”) Rehadapt’s L3D system.
System bridges
AMPS hole pattern
The AMPS hole pattern is an industry standard configuration. It consists of four holes located in a rectangular pattern spaced at 30 x 38 mm. It is common for the AMPS pattern to consist of multiple holes to allow vertical or horizontal implementation. For hand-held and tablet sized devices. Many cradles, brackets and protective cases (e.g. LifeProof) use the AMPS system
Velcro fastener
The famous hook-and-loop Velcro fastener consists of two components: a lineal fabric strip with tiny hooks that could “mate” with another fabric strip with smaller loops, attaching temporarily, until pulled apart. Perfect for attaching devices to our moun- ting system when no screws can be used.
Adhesive tape
Permanent fixation with strong adhesive tape. Perfect for attaching devices to our mounting system indefinitely when no screws can be used.
