Home>Components>Bases>Extensions
  • M3D Offset Link 1″

    11.1525

    WheelchairM3D

    Monty 3D universal offset spacer 25 mm (#1") to be applied between any mating M3D Ø22,25 mm (⅞") Tube joint, base or swivel unit components.
  • M3D Offset Link 1 ½”

    11.1538

    WheelchairM3D

    Monty 3D universal offset spacer 38 mm (1 ½") to be applied between any mating M3D Ø22,25 mm (⅞") Tube joint, base or swivel unit components.
  • M3D Base Coupler

    11.1555

    WheelchairM3D

    Coupler with a quick release mechanism to easily remove the entire mount from the wheelchair (leaving only the frame clamp and the inner part attached). A precise alignment is achieved through a racetrack-shaped connection. The ergonomic hand lever and locking pin provide maximum safety. Adds a 38mm offset (1.5").
  • M3D Base Coupler Inner Part

    11.1553

    WheelchairM3D

    Inner half of the M3D Base Coupler (#11.1555) attached to the wheelchair. Part with the hand lever.
  • M3D Base Coupler Outer Part

    11.1554

    WheelchairM3D

    Outer half of the M3D Base Coupler (#11.1555) attached to the mount. Part with the magnet.
  • M3D Base Adapter 90°

    11.1590

    WheelchairM3D

    Perpendicular connector that allows the attachment of M3D and L3D mounts on otherwise poorly accessible frame parts. Locking with Allen screws.