Loaing

Catalog

  • Elegant floor mount with flat base for positioning of lightweight devices (max 1,5 kg / 3,3 lbs), with Light 3D Tubes and QuickShift handles. UDS included. Rollable when tilted.

    Details

    FS-L3D HD

    17.1410

  • Elegant floor mount with flat base for positioning of lightweight devices (max 1,5 kg / 3,3 lbs), with Light 3D Tubes and QuickShift handles. UDS not included. Rollable when tilted.

    Details
  • Light 3D 16/10 connector. Connects a Ø16 mm (5/8″) Tube to a Ø10 mm (3/8″) rod. Unlimited 3D adjustment.

    Details

    L3D 16-10

    14.1201

  • Light 3D 16/10 connector with screw. Connects a Ø16 mm (5/8″) Tube to a Ø10 mm (3/8″) rod. The position of each Tube is locked separately with screws. Unlimited 3D adjustment.

    Details
  • Light 3D 16/10 connector with lever. Connects a Ø16 mm (5/8″) Tube to a Ø10 mm (3/8″) rod. The position of each Tube is locked separately with screws. Unlimited 3D adjustment.

    Details
  • Light 3D 16/10 connector with a QuickShift lever. Connects a Ø16 mm (5/8″) Tube to a Ø10 mm (3/8″) rod. Unlimited 3D adjustment.

    Details

    L3D 16-10 QS

    14.1251

  • Light 3D 16/10 connector with a small QuickShift lever. Connects a Ø16 mm (5/8″) Tube to a Ø10 mm (3/8″) rod. Unlimited 3D adjustment.

    Details
  • Light 3D table mount with two Tubes and two joints with lever. Adapter for the Big Red, the BIGmack, and the BIG Step-by-Step included.

    Details
  • Light 3D table mount with two Tubes and two joints with lever. Adapter for the Jelly Bean, the LITTLEmack, the Step-by-Step, the iTalk2 and the AirLink included.

    Details
  • Light 3D table mount with two Tubes and two joints with lever. Adapter for the Specs, the Big Buddy Button, the Buddy Button, the Cup, and the Switches included.

    Details
  • Light 3D table mount with two Tubes and two joints with lever. Adapter for the PikoButton included.

    Details
  • Light 3D tableclamp with three Tubes, two joints with lever and one swivel unit to hold an AMDi iAdapter.

    Details
  • Light 3D single switch mount to position a switch at wheelchair headrest or similar, with QuickShift levers. State frame clamp upon order. Default: 10 mm (3/8″) round.

    Details
  • Light 3D wheelchair mount with three Tubes, two joints with lever and one swivel unit to hold an AMDi iAdapter. State wheelchair clamp upon order.

    Details
Go to Top