Extensions

COUPLER

Remove the entire mount directly at the wheelchair frame with a quick release mechanism.

M3D Base Coupler | 11.1555
Coupler to easily remove the entire mount at the frame clamp. Precise alignment achieved through a racetrack-shaped connection. Hand lever and locking pin for maximum safety. Adds a 38mm offset (1.5").
M3D Base Coupler Inner Part | 11.1553
Inner half of the M3D Base Coupler (11.1555) attached to the wheelchair. Part with the hand lever.
M3D Base Coupler Outer Part | 11.1554
Outer half of the M3D Base Coupler (11.1555) attached to the mount. Part with the magnet.

Check out our Youtube channel for more help!

SPACERS

Connector that allows to gain more distance from the frame clamp when the wheelchair frame or accessories like breaks are in the way.

M3D Offset link 1" | 11.1525
Monty 3D universal offset spacer 25mm (1") to be applied between any mating M3D joint, base or swivel unit components.
M3D Offset link 1 ½" | 11.1538
Monty 3D universal offset spacer 38mm (1 1/2") to be applied between any mating M3D joint, base or swivel unit components.

Combineable

The offset spacers can be daisy chained if more distance is needed.

ANGLE

Connector that allows the attachment on otherwise poorly accessible frame parts.

M3D Base Adapter 90° | 11.1590
Perpendicular connector that allows the attachment of M3D and L3D mounts on otherwise poorly accessible frame parts. Locking with Allen screws.